Off-Board Reprogramming Add-On

Order Now & Save + Bonuses

For a limited time we are offering an Introductory Special Price on the EASE Off-Board Reprogramming  Add-on.  If you purchase online today you will receive $50 off the normal retail price AND you will also receive 3 FREE Bonuses worth $270.

Reprogram Vehicle Controllers On Your Bench Top

Reprogram vehicle controllers on your bench top with the EASE Domestic Off Board Reprogramming Set Add On for Snap-on's Pass Thru Pro III and Pro II.

To reprogram a vehicle controller out of the vehicle you need to connect to the data, power and ground pins in the controller’s connector. This sounds difficult since there are several different controllers, connectors and pin out diagrams.  Our Off-Board Reprogramming Add-on makes off board reprogramming easier.

This Add-on allows you to use your Snap-on Pass Thru Pro to reprogram GM, Ford & Chrysler powertrain (PCM/ECM) controllers out of the vehicle.  + Supported Vehicles

Based on vehicle selection, our Off-Board Cable Selection Software designates which off-board cable to use...

... and provides the wiring diagram you need to ensure a successful reprogramming event.

In addition to using this set for your own shop’s convenience, you can use it to add a new revenue stream to your business. Other shops without reprogramming capability in your area can bring their controllers to you for reprogramming instead of the dealer.

Off-Board Reprogramming Process

With the Off Board Reprogramming Set Add On you can use the Pass Thru Pro to reprogram supported GM, Ford & Chrysler PCM/ECM controllers out of the the vehicle using the following process.

1) Select the vehicle in the EASE Off-Board Cable Selection Software.

2) Using the pin-out diagram from the EASE software, connect the specified EASE off-board cable to the vehicle powertrain controller’s connector pins and the EASE Off-Board Reprogramming Adapter (ORA).

3) Next connect the Pass Thru Pro unit to the ORA’s OBD II DLC port.

4) Plug the ORA’s power transformer into any wall outlet.

5) You are now set up to reprogram the vehicle controller using the OEM’s website (A data subscription to the vehicle manufacturer’s website is required).

Reprogram GM, Ford & Chrysler Powertrain Controllers
Out Of The Vehicle

With the Off-Board Cable Set Add-on, the Pass Thru Pro to can be used to reprogram most GM, Ford & Chrysler powertrain controllers out of the vehicle. *

General Motors and Saturn

  • 1996 - 2009 Powertrain flash reprogrammable controllers
  • 2010 - 2013 Powertrain flash reprogrammable controllers NOT using Global A Architecture.  Click hereto see a list of unsupported Global A vehicles
  • 2014 and newer not supported

Ford, Lincoln and Mercury

  • 1996 and newer Powertrain flash reprogrammable controllers

Chrysler, Dodge, Plymouth and Jeep

  • 1996 and newer Powertrain flash reprogrammable controllers

*The Pass Thru Pro supports listed vehicles.
Manufacturer Reprogramming Data Subscription(s) Required.

What's Included

The following is included with the EASE Off-Board Reprogramming Add-on:

  • Off-Board Cable Selection Software
  • GM J2534 Advanced Universal Off-board Cable 1
  • GM J2534 Advanced Universal Off-board Cable 2
  • GM J2534 Advanced Universal Off-board Cable 3
  • Ford J2534 Advanced Universal Off-board Cable 1
  • Chrysler J2534 Advanced Universal Off-board Cable 1
  • Chrysler J2534 Advanced Universal Off-board Cable 2
  • Off Board Reprogrammer Adapter
  • Transformer 12 VDC 1.5A
  • 1 Year of Technical Support By Phone or Email
  • NOTE:  The Reprogrammer Assistant Software is NOT included with this item.

EASE Off-Board Cable Selection Software Requirements

To ensure maximum performance and proper operation of the EASE Off-Board Cable Selection Software, the following is required. *

  • Snap-on's Pass Thru Pro III or Pass Thru Pro II Reprogrammer Unit, OBD II Cable and USB Cable
  • OEM Data Subscription(s)

Note: This Add-on is not affiliated with, sponsored or endorsed by Snap-on, Inc.

A PC is needed with the following minimum requirements:

  • Windows Vista, 7, 8 or 10 (32 bit or 64 bit) **
    Note: Most OEMS reflash software does not support Windows 8 or 10.
  • Minimum Processor: Intel Dual Core Processor
    Recommended Processor: Intel Core 2 Duo 2.5 GHz and above
  • Minimum RAM: 2 G
    Recommended RAM: 2 G and up
  • 20 GB Hard Drive Space for installation
  • CD-ROM/DVD Drive
  • 1024 x 768 Graphics Card
  • Internet Connectivity
  • Email Account
  • A valid e-mail address To Receive your Software Access Code  

After you install the software on your PC, software access codes must be obtained from the EASE Access Code Web Site. These codes must be entered before the software can be used. You can get your access codes 24 Hours a Day 7 Days a Week at  www.obd2code.com

X      **  Note: Our software supports Windows 8 and 10 and 64 bit Windows OS but some OEM's reprogramming software only support Windows 7 and/or 32 bit Windows OS.   Be sure to check the OEM's website for details.   Click here  to view links to OEM reprogramming websites.

Order The Off-Board Reprogramming Add-On Now

For a limited time we are offering a Special Price on the EASE Off-board Reprogramming Add-on. If you purchase online today, you will receive $50 off the normal retail price AND you will also receive 3 FREE Bonuses worth $270.

This Amazing  Offer May Expire Soon

We just don't know how long we are going to continue to offer this special. With that said, if you really want this add-on, you should buy it today. Don't Delay !

30 Day Money Back Guarantee

The EASE Off-Board Reprogramming Add-On is fully covered by our 30 Day Money-Back guarantee!

Try it  for 30 Days and put it through the ringer. You be the judge. If this system doesn't deliver everything we've promised, or if you are unhappy with it for any reason, just return it and we'll refund your purchase price.

YES,  I can't wait to get the EASE Off-Board Reprogramming Add-on
I understand that with my purchase I will receive the following:

  • Domestic Off-Board Cable Selection Software
  • GM J2534 Advanced Universal Off-board Cable 1
  • GM J2534 Advanced Universal Off-board Cable 2
  • GM J2534 Advanced Universal Off-board Cable 3
  • Ford J2534 Advanced Universal Off-board Cable 1
  • Chrysler J2534 Advanced Universal Off-board Cable 1
  • Chrysler J2534 Advanced Universal Off-board Cable 2
  • Off Board Reprogrammer Adapter
  • Transformer 12 VDC 1.5A
  • 1 Year of Technical Support By Phone or Email

X      OEM Data Subscriptions Not Included

X      Reprogramming Assistant Software Not Included

If you order online TODAY, we'll also include the following
3 Bonuses - valued at $270 - for FREE!

  • FREE GM RPO Database Software Utility - $50 Value
  • FREE Additional Year of Tech Support - $200 Value
  • FREE UPS Ground Shipping to USA * - $20 Value

MSRP: $597

Special Price: $547

Click the orange "Add to Cart" button below and let's get started...

(1 Payment Of $547)

Add To Cart

 

   

* Ordering from outside the USA?Contact Us
to order and for shipping cost.