Reprogramming Assistant Software Add-On

EASE's Reprogramming Assistant Makes Reflashing With the Snap-on Pass Thru Pro Easier!

Do you feel overwhelmed when it comes to reflashing a vehicle controller?

Are you unsure of what the proper reprogramming procedure is?

Don’t worry, you’re not alone.  Reprogramming a vehicle controller seems like an intimidating task but it’s easier than you’d think if you have an assistant to guide you. EASE's exclusive Reprogramming Assistant software guides you step-by-step thru the reprogramming process. It also includes the scan tool functions you need for reprogramming such as reading the VIN, DTCs, I/M status, MIL status and calibration and it works with the Snap-on's Pass Thru Pro III and Pro II.  EASE's Assistant helps to eliminate the guesswork and costly mistakes, ensuring a successful reprogramming event.

Are You Ready To Start Reprogramming With Confidence?

Would you like to have an easy to use software program...

      ... that guides you step-by-step thru reprogramming a vehicle controller?

      ... that makes the reprogramming process faster and easier?

      ... that can be used with the Snap-on Pass Thru Pro Reprogrammers?

      ... that also includes scan tool functions?

      ... that includes built in links to the vehicle OEM websites?

      ... that offers both on-board and optional off-board reprogramming support?

Then the EASE Reprogramming Assistant Software Add-On is your solution. This software program will guide you step-by-step to reprogramming success.

Extremely Helpful,  Easy To Use & Loaded With Features

The Reprogramming Assistant (RA) contains the most comprehensive list of support tools and features of any reprogramming system.

When we designed the Reprogramming Assistant care was taken to provide our customers with the best value for their money. By making our software easy to use, it will take you less time to reprogram a vehicle's computer systems. Time saved means more money to your bottom line.

Take A Look At This Long List Of Features!

  • Manufacturer specific assistants that can be used to analyze a controller and guide you thru the reprogramming process for Chrysler, Ford, General Motors, Hyundai, Infiniti, Kia, Lexus, Mitsubishi, Nissan, Saab, Scion and Toyota
  • Universal assistant that can be used to analyze a controller and guide you thru the reprogramming process for Acura, Audi, BMW, Honda, Isuzu, Jaguar, Land Rover, Maserati, Mazda, Mercedes Benz, Mini, Porsche, Smart, Subaru, Suzuki, Volkswagen, Volvo and others
  • Configurable settings for manufacturer’s flash application
  • Convenient link to OEM websites.
  • In vehicle reprogramming precautions
  • If you analyze the controller before reprogramming, the old calibration is saved for comparison to the new one to verify that the reflash was successful.
  • Wizard analyzes the controller to get basic info such as VIN, calibration, DTCs, IM status and MIL status
  • Read and clear DTCs. Read Mode $0A permanent DTCs and MIL Status.
  • After pulling DTC you can click on the DTC and the Required Learn Procedures are displayed to help determine what needs to be done after a reprogram.
  • Read I/M status and estimate the result of an emissions inspection. Configurable options for not complete monitors.
  • Includes instructions for completing I/M Monitors.
  • Read VIN and Calibration
  • Creates a printable report of the vehicle after analyzing.
  • Express Mode to skip through the walkthrough and go right to the required screens.
  • Demo Mode to go through the software screens without hooking up to a controller or vehicle.
  • Link to reprogramming anomalies website to determine problem vehicles before an attempt to reprogram is made.
  • Want to see + More Features - Click in right-side menu bar

 

EASE Reprogramming Assistant Requirements

To ensure maximum performance and proper operation of the EASE Reprogramming Assistant, the following is required: *

  • Snap-on's Pass Thru Pro III or Pass Thru Pro II Reprogrammer Unit, OBD II Cable and USB Cable
  • OEM Data Subscription(s)

Note: This Add-on is not affiliated with, sponsored or endorsed by Snap-on, Inc.

A PC is needed with the following minimum requirements:

  • Windows Vista, 7, 8 or 10 (32 bit or 64 bit) **
    Note: Most OEMS reflash software does not support Windows 8 or 10.
  • Minimum Processor: Intel Dual Core Processor
    Recommended Processor: Intel Core 2 Duo 2.5 GHz and above
  • Minimum RAM: 2 G
    Recommended RAM: 2 G and up
  • 20 GB Hard Drive Space for installation
  • CD-ROM/DVD Drive
  • One free USB or Ethernet communication port
  • 1024 x 768 Graphics Card
  • Internet Connectivity
  • Email Account
  • A valid e-mail address To Receive your Software Access Code

After you install the software on your PC, software access codes must be obtained from the EASE Access Code Web Site. These codes must be entered before the software can be used. You can get your access codes 24 Hours a Day 7 Days a Week at  www.obd2code.com

X      **  Note: Our software supports Windows 8 and 10 and 64 bit Windows OS but some OEM's reprogramming software only support Windows 7 and/or 32 bit Windows OS.   Be sure to check the OEM's website for details.   Click here  to view links to OEM reprogramming websites.

 

What's Included

The following is included with the EASE Reprogramming Assistant Software Add-On

  • Reprogramming Assistant Software Installation CD
  • 1 Year of Technical Support By Phone or Email 

We'll also include the following 4 Bonuses - valued at $460 - for FREE!

  • FREE Professional Generic Scan Tool Software - $195 Value
    Delivered by Web download
  • FREE GM RPO Database Software Utility - $50 Value
  • FREE Additional Year of Tech Support - $200 Value
  • FREE UPS Ground Shipping to USA* - $15 Value

+ Click Here For More Info on the Free Bonuses

* Ordering from outside the USA?  Contact Us to order and for shipping cost.

 

Order The EASE Reprogrammer Assistant Add-On Now

For a limited time we are offering a special Price on the EASE Reprogrammer Assistant Add-on for the Snap-on Pass Thru Pro. If you purchase online today you will receive $50 off the normal retail price AND you will also receive 4 FREE Bonuses worth $460 .
 

This Amazing Offer May Expire Soon

We just don't know how long we are going to continue to offer this special.  With that said, if you really want this add-on, you should buy it today.  Don't Delay!
 

30 Day Money Back Guarantee

The EASE Reprogrammer Assistant Add-on is fully covered by our 30 Day Money-Back guarantee!

Try it  for 30 Days and put it through the ringer. You be the judge. If this system doesn't deliver everything we've promised, or if you are unhappy with it for any reason, just return it and we'll refund your purchase price.

YES,  I can't wait to get the EASE Reprogrammer Assistant Add-on
I understand that with my purchase I will receive the following:

  • Reprogramming Assistant Software Installation CD
  • 1 Year of Technical Support By Phone or Email 

We'll also include the following 4 Bonuses - valued at $460 - for FREE!

  • FREE Professional Generic Scan Tool Software - $195 Value
    (Delivered by Web download)
  • FREE GM RPO Database Software Utility - $50 Value
  • FREE Additional Year of Tech Support - $200 Value
  • FREE UPS Ground Shipping to USA * - $15 Value

X      OEM Data Subscriptions Not Included

MSRP: $347

Special: $297 plus 4 FREE Bonuses

Click the orange "Add to Cart" button below and let's get started...

(1 Payment of $297)

Add To Cart

 

 

 

* Ordering from outside the USA?Contact Us
to order and for shipping cost.

 

On-line Special

For a limited time we are offering a Special Price on the EASE Reprogrammer Assistant Add-on. If you purchase online today you will receive $50 off the normal retail price AND you will also receive 4 FREE Bonuses worth $460 .

Reprogrammer Assistant

 

Product Review
J. Shore

"wish i would have had this a year ago"

"THANK YOU
THANK YOU
software works sooo nice.
wish i would have had this a year ago. thank you again."
J. Shore, Star Service

Product Review
W. Mouradian

"really easy to use in programming."

"The EASE workbench (Reprogramming Assistant) software is really easy to use in programming. It is nice when programming Chrysler and Ford to have the ability to check for TSB’s through the software at no cost. I would certainly recommend this J2534 software to other technicians."
W. Mouradian
Florida